Sign In Or Sign Up
Language
English
Currency
USD (US Dollar)
!! We will be closed from the 16th until the 28th of January for Chinese New Year !!
Your Cart 0 Itemes
ALL CATEGORIES
  • MATEK - AP_PERIPH DRONECAN TO PWM ADAPTER, CAN-L4-PWM
  • MATEK - AP_PERIPH DRONECAN TO PWM ADAPTER, CAN-L4-PWM
  • MATEK - AP_PERIPH DRONECAN TO PWM ADAPTER, CAN-L4-PWM
  • MATEK - AP_PERIPH DRONECAN TO PWM ADAPTER, CAN-L4-PWM
1/1

MATEK - AP_PERIPH DRONECAN TO PWM ADAPTER, CAN-L4-PWM

No. HP0024-0100
SKU:
Login or Register to see prices
Received successfully
Coupon Code
CONTINUE SHOPPING
Add to Favorites (1)
  • MATEK - AP_PERIPH DRONECAN TO PWM ADAPTER, CAN-L4-PWM
  • MATEK - AP_PERIPH DRONECAN TO PWM ADAPTER, CAN-L4-PWM
  • Description
  • CAN-L4-PWM is an Adapter Node based on ArudPilot AP_Periph firmware.
  • Using this adapter to turn DShot capable ESCs into CAN ESCs, including full ESC telemetry.  and turn PWM servos into CAN servos.

Specifications

  • MCU: STM32L431xC, 256KB Flash
  • 1x CAN, DroneCAN Protocol
  •  9x PWM outputs (8x Dshot)
  • 1.5x UARTs
    • UART1, RX1
    • UART3, Tx3/ Rx3
  • ST debug, SWCLK & SWDIO
  • LED
    • Blue, Fast blinking,  Booting
    • Blue, Slow blinking, working
    • Red, 3.3V indicator
  • Input voltage range: 4.5~5.5V  @5V pad/pin
  • Power consumption: 30mA
  • Operating Temperatures: -20~80 °C
  • “Vx” pads are for powering servos via external BEC.  “Vx” is not connected to other components on this board.
  • “Rx1” pads are for ESC Telemetry, DO NOT connect ESC BEC output to Rx1 pad.
  • Physical
    • 1x JST-GH-4P(SM04B-GHS-TB) for CAN
    • Board Size: 32mm*25.4mm.  3.5g
    • Mounting: 20mm. Dia.3mm
  • Firmware
    • ArduPilot AP_Periph  MatekL431-Dshot
    • Update via DroneCAN GUI Tool

Packing

  • 1x CAN-L4-PWM board
  • 1x JST-GH-4P to JST-GH-4P 20cm silicon wire
Frequently Bought Together
more
Frequently Bought Together